Indoor Shoes for Wooden Floors: A Flat Sole for Your Boots

If you play badminton, jokgu or another game on a wooden sports floor, the shoe that works is close to the opposite of a football boot: a flat rubber sole with no studs. You do not always need a new pair to get one. If the upper of an old pair of boots or turf shoes still fits you well, we can take off the studded sole and fit a flat indoor sole instead. Here is what that sole is, which shoes can take it, and what to check before you choose it.
What a flat indoor sole is for
On a smooth wooden floor, grip comes from rubber touching the floor, not from anything digging in. A flat indoor sole puts the whole face of the rubber on the ground, with a shallow tread to help it hold when you push off and change direction. Badminton and volleyball shoes are built the same way.
Studs work the other way round. Long firm ground (FG) studs are made to sink into grass, and the short rubber studs on a turf (TF) sole sit between the fibres of artificial grass. On a hard, smooth floor neither has anything to sink into, so only the tips of the studs touch the boards. That means less rubber on the floor, and the shoe can feel unsteady on quick turns. Outdoor soles can also scuff or mark an indoor floor, which is one reason some sports halls ask players to change into clean indoor shoes.
If you are not sure whether your floor calls for a flat sole or a turf sole, our guide to IC and TF futsal shoes compares the two side by side.
See 3,900+ before-and-after repair photos by brand and repair type
Our indoor sole: STUD-07
STUD-07 is the flat indoor sole among our 19 replacement soles. It is made for indoor wooden floors, and players use it for sports such as badminton and jokgu, the Korean game that mixes football and volleyball over a low net, played with the feet and head.
- Material: natural rubber, which is tough, slow-wearing and grippy on a court floor.
- Tread: a herringbone pattern around the toe and heel, a diamond grid across the middle, and a round green insert under the ball of the foot.
- Cushioning: none. It is a plain rubber sole without a foam layer.
- Sizes: 240 to 305mm.
- Weight: 270g at size 260mm.
It is not our lightest sole. Our cushioned turf soles with a Phylon foam layer weigh less, for example 213g at 260mm for STUD-09. Those soles have studs, though, so they are made for turf rather than a wooden floor. If you want a flat sole for indoor courts, STUD-07 is the one we fit.
Which shoes can take it
Most of the shoes we fit with STUD-07 started life with a different sole. These are real jobs from our before-and-after galleries:
- Football boots with molded studs. A red leather Asics DS Light went from its firm ground studs to a flat indoor sole. That is the pair in the photo at the top of this page.
- Turf shoes. A white leather Mizuno Morelia and a knitted Nike Mercurial X with a sock collar both swapped their turf soles for STUD-07.
- Badminton shoes. We have also had requests to fit it on badminton shoes, such as a Yonex pair kept at the same size.
It is a small part of our work. Of the 3,228 published resoling jobs we counted, 43 got an indoor sole, and 73 went the other way, from an indoor sole to a turf sole (see the numbers). Both point to the same rule: the sole should match the floor you actually play on.
Leather and synthetic uppers can both take a new sole, as the three pairs here show. What matters more is the condition of the upper, because a new sole does not mend a torn upper. On most shoes we also replace the worn midsole, the layer between the outsole and the insole. If the shoes feel a little tight or loose, we can adjust the size at the same time as the new sole.
Before you choose it
- Keep it indoors. A flat sole has nothing to hold artificial grass with, and rough outdoor ground wears a shallow tread down. If you also play on turf, a second pair with a turf sole is the simpler answer.
- Check your hall's rules. If your hall asks for non-marking soles, ask what it accepts. A simple home check that squash clubs suggest is to rub the sole firmly across a sheet of white paper: a dark streak means the sole marks.
- Know there is no cushion. STUD-07 is plain rubber under the midsole. If soft cushioning matters most to you, tell us how long and how often you play, and we will tell you honestly whether this sole suits you.
- Check the size range. STUD-07 comes in 240 to 305mm. We do not have a flat indoor sole for shoes smaller than that.
Getting a quote
Prices depend on your shoes and the work they need. Send photos of the side and the sole on WhatsApp, tell us what you play and on what floor, and we will reply with a quote, usually within 2 to 4 hours.
The work usually takes 2 to 3 weeks, up to a month in busy periods. Our workshop is in Goyang, next to Seoul. You can visit by appointment, open daily from 10:00 to 19:00, or send the shoes by courier, and we will send you the Korean address on WhatsApp.
You can also reach us on WhatsApp at +82 10 3547 7744, on KakaoTalk (ID 21apro) or by email at 21apro@naver.com.
Want a flat sole for an indoor floor?
Send a side view and the sole of your shoes, and tell us what you play. We will tell you whether STUD-07 suits them.
Ask on WhatsApp See STUD-07Watch the work

Replacing the outsole of Nike Mercurial Vapor XIV futsal shoes, resizing them and making a new tongue. About 18 minutes. Watch on YouTube